Top mse seal supply for aviation

Company Advantages
1. All materials of DMS Seals mse seal meet global standards. DMS Seals provides professional design and production of high-grade o-ring seals
2. The product has been widely used in many mills and industrial plants where require clean treated water for internal operations. The high pressure seals have strong wear resistance to hard conditions
3. The product has been certified officially as per the industry quality standards
4. It is in high accordance with the quality inspection standards. DMS O Ring Manufacturers strictly follows the ISO9001 international quality certification system for production management
5. The product has been tested on various quality parameters and been approved to be excellent in many respects such as performance, durability, etc. Seal we produced has applications in a wide range of fields

1. Application and properties

Suitable for reciprocating piston rod or piston single acting seal, the working pressure has a wide range of adaptability, and the pressure capacity can be enhanced by increasing the tail length size or increasing the check ring.

Small friction coefficient, The contact pressure between the mating surface and the mating surface is low, and the friction between the work face and the mating surface is the smallest in all seal types. with or without lubrication can work, wear resistance, long service life.

The working medium of the sealing sleeve has wide adaptability, and the other chemicals are not reacted except soluble alkali metal, high temperature fluorine gas and three fluoride chloride.

The working temperature range is wide, and can be used for -200 ℃ to +250 ℃.

It can be used for very high speed, very low speed, micro-stroke and other special conditions.

Suitable for aviation, military and industrial sealing groove size, The standard installation groove is the same size as the standard O ring, and the size is small. It can be designed as non standard parts to meet the sealing requirements of any size groove. The groove is open or semi open.

It can be used in rotary sealing. It can adapt to large eccentricity and beating.

2. Standard materials

Sealing sleeve: PTFE

Spring: Stainless steel 304, 316

3. Working Conditions

4. Installation Sizes

Back pressure surfaceR1=0.1 ~ 0.2, tank bottom R2=0.3 ~ 0.5, Import lengthC=(0.7 ~ 1.0)L.

5. Matters needing attention  

Ⅰ, The installation groove must be open or semi open, and it is recommended to be open.

Ⅱ, If the seal is for the rotating shaft, it is recommended that the surface hardness of the shaft should be no less than HRC40.

Ⅲ，Considering the adaptability of the working medium, the adaptability of the jacket and spring should be taken into account.

Ⅳ, It is better to install an anti fouling ring or a antifouling guide ring in the notch direction in front of the seal.

Company Features
1. The quality and quantity of production of Dms Seals Technology Co.,limited are at the leading level in China. Whenever there is any problems for our mse seal , you can feel free to ask our professional technician for help.
2. We expect no complaints of conical spring mechanical seal from our customers.
3. All our rod end seals have conducted strict tests. Upholding the corporate philosophy “Dedicated to Customer Success,” we make united efforts to create innovative products that are globally competitive.