DMS SEALS TECHNOLOGY CO.,LIMITED

Site map

The Professional Sealing Solution Supplier.

Mail to: sales@dmsseals.com

TEL:+86-757-86235767

O-RINGS

Home  > PRODUCTS  > O-RINGS

Hot Products

GSF - Bronze PTFE Hydraulic Piston Seal glyd ring with NBR/FKM O-Ring
GST -  Hydraulic Bronze PTFE Tape Guide Strip Wear Ring

Feedback

Fill out the detailed information and and you will get the best design solution for FREE!

The O-ring of DMS SEALS is often used in hydraulic and pneumatic transmission systems and has wide applications. It can be used for both static and reciprocating seals. Moreover, it can also be used in rotary sealing systems. The O-ring can be installed in a groove with a rectangular cross section on the outer or inner circle, achieving a good sealing effect. It has many advantages compared with other types of sealing rings. Its compact structure makes it easy to assemble and disassemble. Moreover, its dynamic frictional resistance is relatively small, and a single piece of O-ring can achieve sealing performance in both directions.

The O-ring seal is noted for a reasonable compression and stretch rate to achieve a good sealing effect. It will not leak when it is sealed statically. At the same time, the O-ring size is properly matched to the groove size. The structure is simple and its installation is very close to the machine. Its most prominent advantage is its self-sealing effect, eliminating the need for periodic adjustments.

We guarantee that the size and mounting grooves of all our O-rings are standardized, so they are cost-effective and easy to maintain. They have low frictional resistance and are suitable for occasions where the pressure is often alternating.


Total: 1 page
Contact