High-quality garter spring seal Supply for aviation

Company Advantages
1. It is characterized by its and .
2. garter spring seal are magnificent and have enjoyed a great fame both at home and abroad for its .
3. garter spring seal shows excellent performance with materials.
4. As long as you make up your minds on garter spring seal , we can provide feasible suggestions to pick the best one.
5. Design of improves the quality in forming garter spring seal body framework.
6. The product has good seaming quality. Its weak jointing parts have all been reinforced with seaming and stitching to make sure the threads will not fall apart.
7. The product has accurate sizes. Its first sample/piece will be made strictly according to the dimension spec for clients' confirm before mass production.
8. This product is safe enough. During the production stage, the harmful substances such as azo dyes or formaldehyde have been all eliminated and removed.
9. The product is not likely to wrinkle. It has been processed with an anti-crease finishing agent to increase the fibers' elasticity and crease recovery performance.
10. This product is durable. Paints, varnishes, coatings and other finishes are typically applied to its surface to improve appearance, and durability.
11. With proper thread count, the product has a soft touch. Especially after washing a few times, it will be felt softer.
12. It can create an attractive focal point for any venue. It is quite unique as a building form, so it quickly forms a visual focus of attention.
13. The speed adaptability of the product enables it to fit properly to different kinds of machines' movements without compromising its sealing effect.
14. Due to its energy efficiency, this product can greatly help reduce carbon dioxide production and greatly contribute to ecological environmental protection.

1. Application and properties

Suitable for reciprocating piston rod or piston single acting seal, the working pressure has a wide range of adaptability, and the pressure capacity can be enhanced by increasing the tail length size or increasing the check ring.

Small friction coefficient, The contact pressure between the mating surface and the mating surface is low, and the friction between the work face and the mating surface is the smallest in all seal types. with or without lubrication can work, wear resistance, long service life.

The working medium of the sealing sleeve has wide adaptability, and the other chemicals are not reacted except soluble alkali metal, high temperature fluorine gas and three fluoride chloride.

The working temperature range is wide, and can be used for -200 ℃ to +250 ℃.

It can be used for very high speed, very low speed, micro-stroke and other special conditions.

Suitable for aviation, military and industrial sealing groove size, The standard installation groove is the same size as the standard O ring, and the size is small. It can be designed as non standard parts to meet the sealing requirements of any size groove. The groove is open or semi open.

It can be used in rotary sealing. It can adapt to large eccentricity and beating.

2. Standard materials

Sealing sleeve: PTFE

Spring: Stainless steel 304, 316

3. Working Conditions

4. Installation Sizes

Back pressure surfaceR1=0.1 ~ 0.2, tank bottom R2=0.3 ~ 0.5, Import lengthC=(0.7 ~ 1.0)L.

5. Matters needing attention  

Ⅰ, The installation groove must be open or semi open, and it is recommended to be open.

Ⅱ, If the seal is for the rotating shaft, it is recommended that the surface hardness of the shaft should be no less than HRC40.

Ⅲ，Considering the adaptability of the working medium, the adaptability of the jacket and spring should be taken into account.

Ⅳ, It is better to install an anti fouling ring or a antifouling guide ring in the notch direction in front of the seal.

Company Features
1. DMS Seals has been successfully made the achievement of producing garter spring seal with its . Dms Seals Technology Co.,limited is a strong spring loaded double lip seal enterprise full of competition. Dms Seals Technology Co.,limited have long histories and strong strength in unbalanced mechanical seal development.
2. Due to our efficient sales strategy and extensive sales network, we have acquired trust and developed successful partnerships in North America, South East Asia, and Europe. We have boasted a design and development team. Depending on their years of expertise, they have a passion for helping our clients solve their most complex product development and design challenges. Our company is supported by a team of QC members. They ensure that our products are manufactured in a controlled environment and enable us to be incredibly responsive to our client's quality requirements. Our factory houses a series of advanced production facilities, including materials processing machines, testing machines, and assembly machines. This means that we can maintain our continuous and stable productivity.
3. In the future, Dms Seals Technology Co.,limited will focus on the innovative development of stationary mechanical seal . Check now! Dms Seals Technology Co.,limited will serve you with our heart and soul. Check now! In order to meet customers' satisfactions, Dms Seals Technology Co.,limited has built a complete service system to solve all possible problems. Check now! Corporate mission shows the company's fundamental purpose that DMS Seals insists on putting quality first and customers foremost the first place. Check now! mechanical shaft seals springs is what we are committed to. Check now!

High-quality garter spring seal Supply for aviation

garter spring seal

Type: