DMS Hydraulic Seal GlyRing GSI for Shaft

1.performance and use

Accommodates bi-directional rod seals. Low friction, simple groove, can also be used in oily medium, available

for larger piston rod clearance. Servo cylinders that require quick response are recommended to be preferred.

The adaptability of the working medium and the working temperature range can be changed by changing the material of the O-ring, so the medium is suitable for

Wide range of adaptability and operating temperature.

It can be used in special working conditions such as very high speed, very low speed and micro-travel.

The mounting groove is small. Seals are easy to install and generally do not require special tools.

Comply with GB/T 15242.1-94 and GB/T 15242.3-94 standards.

Products with different sections can be selected according to the actual working pressure value. In principle, the greater the working pressure, the greater the

Products with larger cross-sections should be used.

2. material

Sealing ring: filled with polytetrafluoroethylene (PTFE). According to different working conditions and sealing requirements, different

Filling material and filling process, please inquire for details.

O-rings: nitrile rubber NBR, fluorine rubber FKM. The material of the O-ring is based on the temperature and working medium of the operating conditions.

Quality decision, if you are not sure, please contact us. For fluororubber (FKM) O-rings, please specify before ordering.