DMS SEALS TECHNOLOGY CO.,LIMITED

Site map

The Professional Sealing Solution Supplier(O Ring Suppliers&Oil Seal Manufacturers).

Mail to: sales@dmsseals.com

TEL:+86-757-86235767

DMS Seal Manufacturer  > 

AI - Page Sitemap

 > 

o-ring seal with nbr or fkm o ring for sale DMS Seal Manufacturer

o-ring seal with nbr or fkm o ring for sale DMS Seal Manufacturer

O-ring seal with nbr or fkm o ring for sale DMS Seal Manufacturer

Diameter Range
6-1600mm
Pressure Range
0-35MPa
Temperature Range
-30℃ +200℃
Speed
1.5 m/s
Medium
general hydraulic oil, water glycol Hydraulic oil and water emulsion type hydraulic oil.
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Dms Seals adheres to the service tenet that we always consider for customers and share their worries. We are committed to providing excellent services.
Company Advantages
1. DMS Seal Manufacturer o-ring seal is manufactured with exquisite development and strict production workmanship.
2. A coordinated look is easy to achieve for DMS Seal Manufacturer pneumatic rod seals .
3. The production of DMS Seal Manufacturer pneumatic rod seals is based on the lean production principle.
4. The production technology of DMS Seal Manufacturer o-ring seal has been greatly improved, promoting standardization production.
5. The product can stand up strong disinfectants. Its specially coated metal materials make it effectively withstand disinfection environments.
6. The product can be used for a long time. Its mechanical components are sturdy enough to wear over time and require little maintenance within its service life.
7. The product features a clean appearance. It is coated with a special layer to effectively prevent adhesion of dust or oil smoke when being placed.
8. It is the pursuit of higher quality life of people that DMS Seal Manufacturer produced the finest o-ring seal to meet the needs.
9. As a dominant o-ring seal supplier, DMS Seal Manufacturer focus on its customer service.
10. Dms Seals Technology Co.,limited quickly controls product quality and trace ability to ensure that quality meets the design specifications and meets customer's requirements.
11. For Dms Seals Technology Co.,limited it is very important to set up the quality system.

1. Installation Recommendation 

o-ring seal with nbr or fkm o ring for sale DMS Seal Manufacturer-1


2. Application and properties

The standard combination seal is suitable for a wide range of pressure work and sliding high speed occasions. Low friction, strong wear resistance.

 

3. Standard materials

Sealing ring: filled PTFE

O-Ring: NBR / FKM


4. Working Conditions

Working  Conditions

Diameter Range

Pressure Range

Temperature Range

Speed

Medium

6-1600mm

0-35MPa

-30℃ +200℃

1.5 m/s

general hydraulic oil, water glycol Hydraulic oil and water emulsion type hydraulic oil.

 

5. Installation Dimensions

Nominal Size of Packing, and Housing dimensions

Order No.

d

D

H

L +0.2

18

20

22

27

29

31

4.3

4.3

4.3

4.5

4.5

4.5

SPN18*27*4.3

SPN20*29*4.3

SPN22*31*4.3

27

31.5

47

36

40.5

60

4.3

4.3

7.3

4.5

4.5

7.5

SPN27*36*4.3

SPN31.5*40.5*4.3

SPN47*60*7.3

53

60

65

66

73

78

7.3

7.3

7.3

7.5

7.5

7.5

SPN53*66*7.3

SPN60*73*7.3

SPN65*78*7.3

70

75

80

83

88

93

7.3

7.3

7.3

7.5

7.5

7.5

SPN70*83*7.3

SPN75*88*7.3

SPN80*93*7.3

90

100

110

103.4

113.4

123.4

7.3

7.3

7.3

7.5

7.5

7.5

SPN90*103.4*7.3

SPN100*113.4*7.3

SPN110*123.4*7.3

120

130

140

133.4

143.4

153.4

7.3

7.3

7.3

7.5

7.5

7.5

SPN120*133.4*7.3

SPN130*143.4*7.3

SPN140*153.4*7.3


READ MORE

Company Features
1. DMS Seal Manufacturer enjoys a good reputation at home and abroad. DMS Seal Manufacturer has a wealth of experience in manufacturing and offering o-ring seal. DMS Seal Manufacturer ushers the hydraulic rod seals industry for profession in manufacturing rod seals . Dms Seals Technology Co.,limited is a O Ring Manufacturers strong brand with great values and reputation. DMS Seal Manufacturer has been focusing on producing first-rate o-ring seal.
2. Dms Seals Technology Co.,limited has a first-class technical team responsible for o-ring seal product development. Dms Seals Technology Co.,limited has managed to add personality to its o-ring seal product development. To achieve technology innovation, Dms Seals Technology Co.,limited has introduced professional technicians and advanced equipment. Dms Seals Technology Co.,limited has successively established strategic partnerships with some R&D institutions. The high output of o-ring seal proves that Dms Seals Technology Co.,limited has solid technology ability.
3. Thanks to the encouragement from customers, DMS Seal Manufacturer brand will continue to develop higher customer satisfication. Inquiry! DMS Seal Manufacturer is a brand which adheres to the customer first principle. Inquiry! We devote to the aim of become an o-ring seal industry standard enterprise. Inquiry!

o-ring seal with nbr or fkm o ring for sale DMS Seal Manufacturer

o-ring seal

Type:

o-ring seal with nbr or fkm o ring for sale DMS Seal Manufacturer-2

Works great.
Replaced O rings in my BM and no more air leaks - worked just fine.
I finally got around to installing this over the weekend. The kit contains everything you could possibly need to get your VANOS running like new again. I didn't have the "rattle" that others did, but did have some vibration when idling that has significantly improved since install! A couple tips about install: Replace your valve cover gasket at the same time. You've already done the hard work and it's cheap. You MUST have a solid vice and impact wrench to open the VANOS and install the anti-rattle rings. I used a friend's garage specifically because of this. Get a bunch of dishes/cups to organize your bolts because you'll have a ton of them by the time you get here. A drill to install/remove bolts will save you a lot of time and effort. Torque the valve cover gasket bolts properly or you'll regret it. This took me ~6 hrs total as I ran into some difficult to remove bolts and one very stubborn solenoid connection.
Arrived quickly even though not on prime- didn’t have to install gamma ring - so that was a plus - they should just make sure they are installed - so people don’t have to do extra step- good quality bucket - will by again.
Good quality. No more leaks in my Mercruiser out drive.
awesome product, wont use anything else
excellent! everything right on
Perfect kit for your save a dive bag.
Easy to install to your existing shower head. It has made such a difference in giving our dogs a bath. So much easier.
I like that everything came in one package and included the pin wheel bearings as well as the thick washers which can be hard to find. I did notice after ordering though that it can be cheaper to buy the items individually.
Honest ad worked for my needs
Exact fit
As described
I use these as replacement o-rings on the top posts of my ball lock liquid and gas posts. The silicone makes it much easier to put on and take off the ball lock connectors, when the kegs are cold. Also seals great! A no brainer!
Good kit, haven’t used all the seals yet but the ones I have fit perfectly.
Don't be afraid to re seal on of these yourself, nothing to it. Worked great with no problems.
Perfect fit and saving money by doing it myself. The pool company charged me $150+ every time my pump's seals wore out and started leaking. The breakdown was $44 for the Go Kit and $100-$115 in labor. I watched a Youtube video on how to replace the Go Kit on my pump and now I am taking my wife to dinner with the savings!!
I use it to give our 100# dog a bath. I like that there is a push lever for on/off. Also I can keep it hung up and use it to rinse the tub after my bath.
worked on my supper pump
good it
worked fine !
Perfect parts kit. Helped me repair my pool pump and save a LOT of money. A+
Aight!!
Fit perfectly!
It was everything I needed for pump replacement
easy to use
Bit expensive, but they are what you need for keg posts.
Saved by bacon already - lost an o ring on the gauge hose and this kit had one to fit.
Great little rebuild kit. I do wish it came with new springs.
perfect repair parts for my minn kota motor
everything fit perfectly
Perfect! Everything fit perfectly. It's like I have new pump. Excellent ship time!
Well made product and helps to keep the smell of liquids in. I use it as a wast container to clean My Spray Guns.. will buy again!
I'm a BMW Technician and I always recommend this kit. It is a well thought out group of parts that will make your Vanos rebuild a breeze! The quality meets my standards, and the price beats them!
Comes in handy - never know what random o-ring you are going to need. Probably have a near life time supply of them with this kit.
All in one kit. Nice good price
Fits the Honda 450es looks like OEM at 1/2 the price. Will buy again. Fast shipping from the seller.
Works Great!
The gasket was a perfect fit for my pool pump housing unit. I had my own lubricant so I didn't use what was provided. I'm sure I'll use the rest of the gaskets eventually but for now I'm just replacing the shaft seal and the seal plate gasket. Glad I bought this kit it helped me save money in the long run. Purchased my kit from badass pool supply excellent service and shipping.
very solid supplier
Just what I needed
Just standard O-rings. They work great for 5-gallon soda kegs used for home brewing. With the 100-pk, I won't have to buy more....ever.
A must have for DIY'ers
Kit worked well! The instructions were good. Got the pump up and running fairly quickly.
My 1377 classic is shooting like new.
Made it fine. Worked well
These seals and a new PSI gauge... not sure which was the culprit; but I changed out both. Was losing pressure on my 4 year old Marauder and now its good as new. Very happy.
All good here...fit my Honda foreman 450es perfect...good stuff.
This is a total kit for my Hayward Pump... quality was no different than wait I would buy at the pool store. I bought this as a replacement for the future but it was less than what I paid for just the single ceramic pump seal.
I bought this to run a fluidized sand bed for a 20 gallon aquarium. The unit comes with a shut off valve and half inch hose connectors. And clips to go around the hose connectors. It also comes with rubber elbow to put on on the top as the first connection. The elbows are too soft to my liking and might be a leak risk. The connectors on the shutoff valve don't seem to make a good seal. I have skipped all the parts an have gone with half inch vinyl tube straight to the top "in" and "out". The first thing I noticed was the flow was much better, which means the shutoff impeded the flow. This is the first one of these I have purchased. Bottom line, I would try a different one and maybe spend a little more money.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...