DMS SEALS TECHNOLOGY CO.,LIMITED

Site map

The Professional Sealing Solution Supplier(O Ring Suppliers&Oil Seal Manufacturers).

Mail to: sales@dmsseals.com

TEL:+86-757-86235767

DMS Seal Manufacturer  > 

AI - Page Sitemap

 > 

o-ring seal for pneumatic equipment DMS Seal Manufacturer

o-ring seal for pneumatic equipment DMS Seal Manufacturer

O-ring seal for pneumatic equipment DMS Seal Manufacturer

Diameter Range
3-1600mm
Pressure Range
0-45MPa
Temperature Range
-30℃+100℃
Speed
1m/s
Medium
hydraulic oil, flame retardant liquid, water and others
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Dms Seals adopts advanced production and management technology to carry out organic production. We also maintain close partnerships with other well-known domestic companies. We are committed to providing customers with quality products and professional services.
Application Scope
Dms Seals's Oil Seal Manufacturer has been widely used in many industries.Dms Seals always pays attention to customers. According customers' actual needs, we could customize comprehensive and professional solutions for them.
  • DMS Seal Manufacturer-DGDA - PTFE Hydraulic Piston Seal with NBRFKM O-Ring
Company Advantages
1. DMS Seal Manufacturer hydraulic piston seals adopts a hygienic design. It is designed with easy cleaning function without no dead areas by the professional designing team.
2. All primary frame components of DMS Seal Manufacturer hydraulic piston seals are manufactured by CNC machine. This advanced production methods offer a degree of precision manufacturing to meet the standards in the tent industry.
3. The production of DMS Seal Manufacturer o-ring seal is strictly in line with the hardware products workflow such as CNC machining, cutting, welding, and surface treatment.
4. DMS Seal Manufacturer [拓展关键词 is manufactured by our professional workers who closely control the entire and manufacturing process to meet the standards of the sauna industry.
5. The product has stable physical properties in the specific conditions of temperature and pressure. Its physical properties are decided by its crystal structure.
6. The product features high efficiency. The ammonia refrigerant used has a prominent cooling capacity, which is better than other refrigerants.
7. The product is consistent in structure. The internal structure of each grain is the same as that of the crystals with a regular external structure.
8. In order to further develop the its business, Dms Seals Technology Co.,limited has established a strong sales network.
9. DMS Seal Manufacturer dealers provide customers with high-quality DMS Seal Manufacturer products and professional services.
10. Dms Seals Technology Co.,limited's o-ring seal production capacity can be effectively scheduled according to the needs of customers.
Installation Recommendation

o-ring seal for pneumatic equipment DMS Seal Manufacturer-1

Installation Sizes

D H8

d h9

L+0.2

H

˂96

D-16.3

8

7.5

96-190

D-20

10

9.5

191-380

D-28

13

12.5

381-1000

D-36

20

19.5

Application and properties

Apply to hydraulic piston sealing, Consisting of a seal ring, two L-shaped POM back-up rings and an acting force O-Ring. The back-up ring acts as a support and guide to ensure a tight sealing environment. High wear resistance, low friction, no crawling phenomenon, easy installation.

Standard materials

Sealing ring: filled PTFE

O-Ring: NBR / FKM

L-Ring: POM / PA

Working Conditions

Working  Conditions

Diameter Range

Pressure Range

Temperature Range

Speed

Medium

3-1600mm

0-45MPa

-30℃+100℃

1 m/s

hydraulic oil, flame retardant liquid, water and others

Installation Dimensions

D H8

d h9

H

L

e

Order No.

40
45
50

23.2
28.2
33.2

7.5
7.5
7.5

8
8
8

7
7
7

DGDA40*23.2*7.5
DGDA45*28.2*7.5
DGDA50*33.2*7.5

56
63
65

39.2
46.2
48.2

7.5
7.5
7.5

8
8
8

7
7
7

DGDA56*39.2*7.5
DGDA63*46.2*7.5
DGDA65*48.2*7.5

70
75
80

53.2
58.2
63.2

7.5
7.5
7.5

8
8
8

7
7
7

DGDA70*53.2*7.5
DGDA75*58.2*7.5
DGDA80*63.2*7.5

85
90
95

68.2
73.2
78.2

7.5
7.5
7.5

8
8
8

7
7
7

DGDA85*68.2*7.5
DGDA90*73.2*7.5
DGDA95*78.2*7.5

100
105
110

80
85
90

9.5
9.5
9.5

10
10
10

10
10
10

DGDA100*80*9.5
DGDA105*85*9.5
DGDA110*90*9.5

115
120
125

95
100
105

9.5
9.5
9.5

10
10
10

10
10
10

DGDA115*95*9.5
DGDA120*100*9.5
DGDA125*105*9.5

130
135
140

110
115
120

9.5
9.5
9.5

10
10
10

10
10
10

DGDA130*110*9.5
DGDA135*115*9.5
DGDA140*120*9.5

145
150
155

125
130
135

9.5
9.5
9.5

10
10
10

10
10
10

DGDA145*125*9.5
DGDA150*130*9.5
DGDA155*135*9.5

160
170
180

140
150
160

9.5
9.5
9.5

10
10
10

10
10
10

DGDA160*140*9.5
DGDA170*150*9.5
DGDA180*160*9.5

190
200
210

170
172
182

9.5
12.5
12.5

10
13
13

10
12
12

DGDA190*170*9.5
DGDA200*172*12.5
DGDA210*182*12.5

220
225
235

192
197
207

12.5
12.5
12.5

13
13
13

12
12
12

DGDA220*192*12.5
DGDA225*197*12.5
DGDA235*207*12.5

o-ring seal for pneumatic equipment DMS Seal Manufacturer-2
Installation Dimensions

Company Features
1. In the field of o-ring seal, DMS Seal Manufacturer has been leading this industry. Dms Seals Technology Co.,limited owns a large independent factory to manufacture piston seals . DMS Seal Manufacturer has always been synonymous with high-end hydraulic piston seals products in China. Nowadays, Dms Seals Technology Co.,limited works as a supplier of high quality o-ring seal products. Dms Seals Technology Co.,limited is a team full of vigor.
2. There is a great progress in quality for o-ring seal with the help of hydraulic piston seals technology. To make it healthier, our o-ring seal applies not only the most advanced technology but also adopts the raw materials. Was it not for our advanced technology, Dms Seals Technology Co.,limited may not produce such high quality o-ring seal. The reliable machine are equipped to guarantee the quality of o-ring seal.
3. DMS Seal Manufacturer will develop horizontally to meet the needs of foreign trade market. Call! Dms Seals Technology Co.,limited will always adhere to the spirit of 'practical , effective , exploitative'. Call! Dms Seals Technology Co.,limited's determined to keep our team and products perfect. Call!

o-ring seal for pneumatic equipment DMS Seal Manufacturer

o-ring seal

Type:

o-ring seal for pneumatic equipment DMS Seal Manufacturer-3

We used this jack to lift 4 pieces of machinery (two of which were CNC machines) in order to position skates under them for moving. Worked as expected. Good value. Quick shipping.
Paid for itself the first day, when I used it to get under a storage shed that I moved. Very sturdy and high quality
This is a great little jack. I like the compact size, and it appears to be well made. Packing was excellent (to the point of being difficult to unpack...) but there was no way these (I bought two) were getting damaged. On a side note, this seller (TEMCo) requires a signature for delivery which is a huge inconvenience to me - I probably would have ordered elsewhere had I known that up front.
Great jack, especially for the price. I've used it to move my 2000 lb milling machine and 3000 lb lathe several times without breaking a sweat.
Using on the wing of a heavy duty Landpride shredder. Great cylinder!
Great I got just what I ordered the are perfect and would buy again thanks for a great buy
great
Good value and it came with extra seals to do either style cylinders.
Fit my Rotary lift cylinders perfectly. The seal kit was identical to the OEM SEALS. No leaks after installation. Cost was much less that the OEM kits.
No seal kits, but works as well as I can tell. Using for a Lanco filter press where the old hydraulic cylinder died. Seals for that cylinder were $600!!! The new cylinder was a little under $2000! This with a steel bar strong enough for the load replaced it. The handle is an essential on these heavy hydraulic cylinders. Would be nice if it had somewhere to bolt it on to something on the bottom. EZ-Tool said you could weld it to something, but that voids the warranty. I'll update if anything goes wrong. I accidentally loaded a different HYDRAFORE cylinder at about ~2 degree angle and it leaked at 5,000 psi. I've taken better care to keep this one straight. Like the other review mentioned, they don't sell the seals, but for the labor it takes to replace the seals well, if this stays cheap, it's worth it just to buy another. Piston could have pitting, for all you know. It should last years if you use it carefully, as 10,000 psi and 100,000 lbs of force should be used carefully. I've only used it twice as of Aug 2018; I'll update if issues happen.
Perfect for leveling my 10' x 10' shed.
This machine is freaking awesome make life easy
Nice piece of equipment. Good price Would recommend it to anyone in need of a cylinder with a 12 stroke..
Good for the price
Worked perfectly
WORKED GREAT JUST AS STATED
Was told prior to purchasing this cylinder that parts are available to repair these cylinders by EZ-Tools USA. Now that I have bad seals and contact EZ-Tools I am told no seal kits are available. Would of made a difference what brand cylinder i purchased. Should be under warranty for a year but after that I guess you can buy another cylinder.
I bought this jack nearly a year ago, and I've used it to pickup my entire machine shop, one machine at a time to install decent leveling feet. I haven't had any problems with it, no leaks, no trouble lifting anything I've used it on. I highly recommend it to anyone in a machine shop environment looking to lift things just enough to use moving skates or leveling feet or the like. The only annoyance in the design of this jack is that the release valve is only on one side. You can swivel the pump to lift the jack so that you can pump it up from the same direction on both the left and right of a machine, but for one of those you have to get around behind to crack the valve. Minor, but in a tight spot it can be a bit of a burden. Keep that in mind as you set up for a job, but I don't think many other jacks have that feature either. Plus, you likely don't have as crowded a shop as I do, since I'm constrained to a fairly small basement...
Great jack for the money, did everything i needed it to do. Moved several machine in our little machine shop, up to 7400 pounds
I used this to move my 1959 Heidelberg Cylinder printing press. It lifted it up like nothing.
Works perfect!
perfect repair parts for my minn kota motor
everything fit perfectly
Perfect! Everything fit perfectly. It's like I have new pump. Excellent ship time!
Well made product and helps to keep the smell of liquids in. I use it as a wast container to clean My Spray Guns.. will buy again!
I'm a BMW Technician and I always recommend this kit. It is a well thought out group of parts that will make your Vanos rebuild a breeze! The quality meets my standards, and the price beats them!
Comes in handy - never know what random o-ring you are going to need. Probably have a near life time supply of them with this kit.
All in one kit. Nice good price
Works great.
Replaced O rings in my BM and no more air leaks - worked just fine.
I finally got around to installing this over the weekend. The kit contains everything you could possibly need to get your VANOS running like new again. I didn't have the "rattle" that others did, but did have some vibration when idling that has significantly improved since install! A couple tips about install: Replace your valve cover gasket at the same time. You've already done the hard work and it's cheap. You MUST have a solid vice and impact wrench to open the VANOS and install the anti-rattle rings. I used a friend's garage specifically because of this. Get a bunch of dishes/cups to organize your bolts because you'll have a ton of them by the time you get here. A drill to install/remove bolts will save you a lot of time and effort. Torque the valve cover gasket bolts properly or you'll regret it. This took me ~6 hrs total as I ran into some difficult to remove bolts and one very stubborn solenoid connection.
Arrived quickly even though not on prime- didn’t have to install gamma ring - so that was a plus - they should just make sure they are installed - so people don’t have to do extra step- good quality bucket - will by again.
Good quality. No more leaks in my Mercruiser out drive.
awesome product, wont use anything else
excellent! everything right on
Perfect kit for your save a dive bag.
Easy to install to your existing shower head. It has made such a difference in giving our dogs a bath. So much easier.
I like that everything came in one package and included the pin wheel bearings as well as the thick washers which can be hard to find. I did notice after ordering though that it can be cheaper to buy the items individually.
Honest ad worked for my needs
Exact fit
As described
I use these as replacement o-rings on the top posts of my ball lock liquid and gas posts. The silicone makes it much easier to put on and take off the ball lock connectors, when the kegs are cold. Also seals great! A no brainer!
Good kit, haven’t used all the seals yet but the ones I have fit perfectly.
Don't be afraid to re seal on of these yourself, nothing to it. Worked great with no problems.
Perfect fit and saving money by doing it myself. The pool company charged me $150+ every time my pump's seals wore out and started leaking. The breakdown was $44 for the Go Kit and $100-$115 in labor. I watched a Youtube video on how to replace the Go Kit on my pump and now I am taking my wife to dinner with the savings!!
I use it to give our 100# dog a bath. I like that there is a push lever for on/off. Also I can keep it hung up and use it to rinse the tub after my bath.
worked on my supper pump
good it
worked fine !
Perfect parts kit. Helped me repair my pool pump and save a LOT of money. A+
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...