DMS Seals-Mechanical Seals and Oil Ring Seals Manufacturer

The Professional Sealing Solution Supplier(O Ring Suppliers & Oil Seal Manufacturers).

Mail to: sales@dmsseals.com


How to Replace an Oil Pan

by:DMS Seals     2019-11-11
Leakage of oil bottom shell will affect engine performance and reduce efficiency.That\'s why it\'s important to replace or fix it as soon as possible.If you are looking for guidelines, you will find it necessary here.
Cars are one of the most magical and complex machines you will ever encounter.The power of the car comes from its heart, which is the engine.Just as the human heart keeps beating, the engine is constantly working when the car is driving.
With the constant movement of high pressure and metal parts, heat and friction will wear the engine.That\'s why the engine needs constant lubrication and cooling.This purpose is provided by the oil bottom shell, from which the lubricating oil is pumped in the engine.
In order to extend the life of the car engine, it needs to be lubricated and cooled during operation.The oil bottom shell facilitates this function, and the oil bottom shell is the pool where the pump draws oil and distributes it to the engine components.In the case of leakage or damage, this lubrication mechanism is hindered, resulting in a decrease in engine efficiency.
That\'s why it\'s critical to replace the pan when it\'s damaged or leaking.There are certain signs to be aware of, which may give you an indirect indication that the oil bottom shell is about to be replaced.If you have recently noticed that there is oil on the garage floor or on the road your car is driving, this is a sign that the pot is leaking.
Many times, either the pot is worn out, a hole is opened, or the gasket is broken.You need to make sure that there is a problem with the oil bottom shell, not just the gasket.If it\'s just a washer, there\'s no need to replace the whole pan.
Just replace the gasket.
If the oil bottom shell does wear out, replace it immediately.If you change the pot, also go and replace the washer.Let me list all the tools and supplies needed to get this done.
The procedure to change the pot is not easy, but if you are willing to do it yourself and like to do so --it-Your own job and then you can do it without any hiccups.First, enter the pot and drain the oil from it.To do this, use the crescent wrench to find the drain bolts of the lid from the bottom of the pan and remove the plug.
Let the oil pour into a clean container or in the oil pan provided by the hardware store.The next part is to remove the old pot.For this, please find the connecting bolts and remove them using the sleeve and the ratchet wrench.As the pan is very firmly attached to the lower side of the engine, there will be quite a few bolts that need to be removed.
After the Bolt has come off, it is easy to remove the pot and put down the ground.When you remove it, the old gasket is torn off the engine.Clean and scrape away the dirt on the lower side of the engine, usually connecting the pan on the lower side of the engine.
Next, prepare to install the new oil pad.
Before fixing the new oil pan in place, you will need to install a new washer on the new oil pan.Make sure the gasket is properly glued to the pan and will not block any holes left by the bolt.With the washer, the new pot can be installed.
By fixing the bolt in place, align the new pan with the fixed gasket with the bolt hole and fix it in the appropriate position.Tighten all the bolts.Make sure the pan is firmly connected together.Refuel the new pot with four to five quarts of lubricating oil.
Use the oil recommended by the manufacturer.Check and ensure no leakage.Please make sure that the oil discharge plug is firmly fixed in the appropriate position.With it, the work is done.You can rest assured that all leakage problems will be solved.
This is a fairly simple job you can do by yourself.You can also save a lot of replacement costs in the process.This is the main benefit of dealing with the car problem yourself.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...