Site map

The Professional Sealing Solution Supplier(O Ring Suppliers & Oil Seal Manufacturers).

Mail to:


How thin can the customized silicone pad be processed?

by:DMS Seals     2021-04-05

The production of silicone products is a complex process and a field with a relatively deep technical content. From different processes, it can be divided into molded silicone products, extruded silicone products and liquid silicone products. The three different processes, the products produced, the use environment and the characteristics are also very different. I have also introduced the difference between molded silicone products and extruded silicone products, but the thickness of some silicone pad products has caused many customers and friends to take a lot of detours. As a manufacturer of silicone products, it is necessary to introduce the details of this aspect to friends who purchase silicone pads.

In fact, there are many types of silicone mats. 99% of the silicone mats are produced by a molding process. However, the molding process also has limitations. Some too thin silicone pads cannot be achieved directly on the mold, whether it is liquid vulcanization or solid vulcanization. This kind of too thin silicone pad is generally difficult to produce. Normally, according to the standard of the mold industry, silicone products with a thickness of less than 1.0mm cannot be produced smoothly. Because the self-removal of the mold edge has reached 1.0mm, if the glue position in the middle is thinner than the glue position on the side, it is technically impossible to achieve. However, it does not rule out that some silicone product manufacturers do have their own unique production technology, which can achieve a thickness of 0.5mm, and some can even achieve a thickness of 0.3mm. This sounds a bit weird.

In summary, in the production of silicone products, especially the production of some silicone pads, the thickness should not exceed 1.0mm as much as possible. If it is less than 1.0mm, the quality and cost of the product will increase a lot. Will increase a lot of intangible costs.

About Silicone Products Factory

'Provide consumers with trustworthy, high-quality, green and environmentally friendly products.' This is the production philosophy that the Sealing Silicone Rubber Products Factory has always adhered to. The company adopts advanced and scientific ERP management system, and has a good cooperative relationship with related institutions, laboratories, professional testing companies and well-known listed companies, and has established its own quality inspection system.

About silicone products

The production of silicone rubber products is a complicated process, and the quality is good or bad except for machine and human factors. Intermediate inspection is the key to discovering and solving major product quality problems. Therefore, maintaining the normal operation of the machine, the good working condition of the mold, and strengthening the operating skills and quality awareness training of the operators and quality control personnel are the keys to reducing poor production and the benefits of the enterprise.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...