loading

DMS SEALS TECHNOLOGY CO.,LIMITED

DMS Seals - Hydraulic Seals and Oil Ring Seals Manufacturer & Supplier

The Professional Sealing Solution Supplier(O Ring Suppliers & Oil Seal Manufacturers).

how do you go about replacing a patio door?

by:DMS Seals     2020-06-05
Over time, the doors of the patio become worn out.
Patio door components often start to fall off, making it difficult for doors to open and close.
This usually indicates that it is time to change the patio door.
For novice handyman, it is not difficult to change the patio door.
This requires patience and follow all the steps to install the door.
Here are the guidelines for replacing patio doors. 1.
One should remove the old patio door by removing it and removing it into pieces.
First, remove the sliding door and the fixing plate.
Remove the screws from the top and bottom of the fixing panel. 2.
Open the panel that is preventing the door from being lifted.
Lift the door from the track
Remove any screws in the panel, including the screws around the rail system. 3.
Remove the second frame like remove the first frame.
Remove any remaining screws and remove the track from the frame.
Lift the roller by sliding the tip of the screwdriver under the roller. 4.
Remove the second frame.
Pull out the flashing metal.
Remove any blocks of wood, nails and screws so that everything goes well.
Make a gasket on the wall frame.
Make sure that each side is horizontal to meet the size requirements of the new Tianjing gate. 6.
New patio doors are installed.
First, install the internal molding.
Nail the mold to the frame. 7.
First place the top edge of the door and put the roller back into the track.
Move the bottom of the door according to the track at the bottom of the frame.
Most bottom rollers are spring loaded and therefore easy to install. 8.
Nails and screws in the door frame and mold.
Make sure you seal the external joint with caulk. 9.
Once the door is in the frame, adjust it to align it with the roller.
If necessary, re-
The position of the lock. 10.
Please make sure to re-insert the screws.
Repair and complete any points of damage. Add the trim. 11.
Upon completion, test the patio door on the track by opening the door and closing it.
Depending on the type of new Skywell door you purchased, there are multiple installation methods.
When installing the door, be sure to understand the type of door in case specific steps must be taken in order to properly install the door.
If you are not sure about installing the patio door, you should hire someone with skills and experience to install it.
The patio door is an attractive function for a person\'s home.
They became very popular and the terrace designers made many improvements in style and design.
In addition, safety glass is now used to avoid damage, especially for children who accidentally touch the door.
Patio doors add value to your home, so it is important that when you replace the old door with a new one, it is correct.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...