loading

DMS SEALS TECHNOLOGY CO.,LIMITED

DMS Seals - Hydraulic Seals and Oil Ring Seals Manufacturer & Supplier

The Professional Sealing Solution Supplier(O Ring Suppliers & Oil Seal Manufacturers).

DMS Seals  >  AI - Page Sitemap  >  DMS Seal Manufacturer ptfe spring seals for reciprocating piston rod or piston single acting seal
DMS Seal Manufacturer ptfe spring seals for reciprocating piston rod or piston single acting seal

DMS Seal Manufacturer ptfe spring seals for reciprocating piston rod or piston single acting seal

Diameter Range
3~1600mm
Pressure Range
40MPa
Temperature Range
-40℃+260℃
Speed
15m/s
Medium
all liquids, chemicals and gases
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. DMS Seal Manufacturer oil seal spring has a novel design and is manufactured according to the guidelines of lean production. We have developed solutions of the sealing of special working condition
2. The demands on this product has been increasing among the customers. DMS Seal manufacturer is a technology enterprise which specialized in the R&D and production of seals
3. The product is proven to be energy efficient. It supports its operation by adopting energy conservation technology, consuming very little energy. DMS Seals takes the lead in grasping the development trend of the industry
4. The product is gentle for fragile and sensitive pool surface. It is specifically designed with soft cleaning function to protect the floor. DMS o-ring seal has advanced machines and equipment for its production

DMS Seal Manufacturer ptfe spring seals for reciprocating piston rod or piston single acting seal-1

1. Application and properties

Suitable for reciprocating piston rod or piston single acting seal, the working pressure has a wide range of adaptability, and the pressure capacity can be enhanced by increasing the tail length size or increasing the check ring.

Small friction coefficient, The contact pressure between the mating surface and the mating surface is low, and the friction between the work face and the mating surface is the smallest in all seal types. with or without lubrication can work, wear resistance, long service life.

The working medium of the sealing sleeve has wide adaptability, and the other chemicals are not reacted except soluble alkali metal, high temperature fluorine gas and three fluoride chloride.

The working temperature range is wide, and can be used for -200 ℃ to +250 ℃.

It can be used for very high speed, very low speed, micro-stroke and other special conditions.

Suitable for aviation, military and industrial sealing groove size, The standard installation groove is the same size as the standard O ring, and the size is small. It can be designed as non standard parts to meet the sealing requirements of any size groove. The groove is open or semi open.

It can be used in rotary sealing. It can adapt to large eccentricity and beating.


2. Standard materials

Sealing sleeve: PTFE

Spring: Stainless steel 304, 316


3. Working Conditions

Working  Conditions

Diameter Range

Pressure Range

Temperature Range 

Speed

Medium

3 - 1600mm

0 - 20MPa

-200 ~ +250

5 m/s

High and low temperature oil and water and other fluids.


4. 
Installation Sizes

Back pressure surfaceR1=0.1 ~ 0.2, tank bottom R2=0.3 ~ 0.5, Import lengthC=(0.7 ~ 1.0)L.

Rod Diameter

 

Groove Width

Groove Diameter

Radial Clearance

 

d

L

D

e

2 ~ 10

2.5

d+3.0

0.05

10 ~ 22

3.2

d+4.0

0.065

22 ~ 52

4.7

d+6.0

0.075

48 ~ 150

7.5

d+10.0

0.09

150 ~ 400

11.0

d+15.0

0.10


5. 
Matters needing attention  

Ⅰ, The installation groove must be open or semi open, and it is recommended to be open.

Ⅱ, If the seal is for the rotating shaft, it is recommended that the surface hardness of the shaft should be no less than HRC40.

Considering the adaptability of the working medium, the adaptability of the jacket and spring should be taken into account.

Ⅳ, It is better to install an anti fouling ring or a antifouling guide ring in the notch direction in front of the seal.



Company Features
1. With high quality production technology, DMS Seal Manufacturer supplies spring seals with finest quality.
2. DMS Seal Manufacturer upholds the concept of oil seal spring. Contact!
The production of DMS Seals oil seal springis line with the international production standards. All the materials we used are based on the international standard
Our design team has strong innovation capacity, making sure our DMS Seals oil seal spring has a variety of innovative, aesthetically-pleasing, and functional designs. All our products conform to EN14960 standard
DMS Seals oil seal spring has appealing styles, which is designed by professional designers. We can print your logo, slogan or other information you ask for
Tested on several parameters of quality, the provided oil seal spring is available at pocket-friendly prices for the clients. Our products feature unique appearance
The whole manufacture process for DMS Seals oil seal spring is finished by our experienced pprofessionals by using the latest advanced equipment. And our products can be installed very easily
oil seal spring is popular in spring seals field because of its spring seals. And our products can be installed very easily
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...