loading

DMS SEALS TECHNOLOGY CO.,LIMITED

DMS Seals - Hydraulic Seals and Oil Ring Seals Manufacturer & Supplier

The Professional Sealing Solution Supplier(O Ring Suppliers & Oil Seal Manufacturers).

DMS Seals  >  AI - Page Sitemap  >  Carbon fiber filled PTFE spring energized seal
Carbon fiber filled PTFE spring energized seal

Carbon fiber filled PTFE spring energized seal

Diameter Range
3~1600mm
Pressure Range
40MPa
Temperature Range
-40℃+260℃
Speed
15m/s
Medium
all liquids, chemicals and gases
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of Carbon fiber filled PTFE spring energized seal
Company Advantages
1. DMS Seal Manufacturer spring loaded seal is manufactured employing the optimum quality raw material as per set industry guidelines. DMS O Ring Manufacturers strictly follows the ISO9001 international quality certification system for production management
2. Our warranty time for spring seals is as long as many years. DMS Seal manufacturer provides good quality and competitive price hydraulic seals
3. To assure its durability, the product is strictly examined by our highly skilled QC professionals. DMS o-ring seal has advanced machines and equipment for its production

Carbon fiber filled PTFE spring energized seal-1

1. Application and properties

Suitable for reciprocating piston rod or piston single acting seal, the working pressure has a wide range of adaptability, and the pressure capacity can be enhanced by increasing the tail length size or increasing the check ring.

Small friction coefficient, The contact pressure between the mating surface and the mating surface is low, and the friction between the work face and the mating surface is the smallest in all seal types. with or without lubrication can work, wear resistance, long service life.

The working medium of the sealing sleeve has wide adaptability, and the other chemicals are not reacted except soluble alkali metal, high temperature fluorine gas and three fluoride chloride.

The working temperature range is wide, and can be used for -200 ℃ to +250 ℃.

It can be used for very high speed, very low speed, micro-stroke and other special conditions.

Suitable for aviation, military and industrial sealing groove size, The standard installation groove is the same size as the standard O ring, and the size is small. It can be designed as non standard parts to meet the sealing requirements of any size groove. The groove is open or semi open.

It can be used in rotary sealing. It can adapt to large eccentricity and beating.


2. Standard materials

Sealing sleeve: PTFE

Spring: Stainless steel 304, 316


3. Working Conditions

Working  Conditions

Diameter Range

Pressure Range

Temperature Range 

Speed

Medium

3 - 1600mm

0 - 20MPa

-200 ~ +250

5 m/s

High and low temperature oil and water and other fluids.


4. 
Installation Sizes

Back pressure surfaceR1=0.1 ~ 0.2, tank bottom R2=0.3 ~ 0.5, Import lengthC=(0.7 ~ 1.0)L.

Rod Diameter

 

Groove Width

Groove Diameter

Radial Clearance

 

d

L

D

e

2 ~ 10

2.5

d+3.0

0.05

10 ~ 22

3.2

d+4.0

0.065

22 ~ 52

4.7

d+6.0

0.075

48 ~ 150

7.5

d+10.0

0.09

150 ~ 400

11.0

d+15.0

0.10


5. 
Matters needing attention  

Ⅰ, The installation groove must be open or semi open, and it is recommended to be open.

Ⅱ, If the seal is for the rotating shaft, it is recommended that the surface hardness of the shaft should be no less than HRC40.

Considering the adaptability of the working medium, the adaptability of the jacket and spring should be taken into account.

Ⅳ, It is better to install an anti fouling ring or a antifouling guide ring in the notch direction in front of the seal.



Company Features
1. Dms Seals Technology Co.,limited has been specializing in R&D, design, manufacture, and sales, offering high quality spring loaded seal for many years. Dms Seals Technology Co.,limited has the latest technology for producing spring seals .
2. The Dms Seals Technology Co.,limited R&D team is skilled and experienced.
3. The company has achieved the Social Operation License. This license means that the company's activities are supported and approved by society or other stakeholders, which further means the company will be under ongoing monitoring to promote it to behave well. Since we want to be a leading oil seal manufacturer supplier, Dms Seals Technology Co.,limited will do our best. Please contact.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...