DMS SEALS TECHNOLOGY CO.,LIMITED

Site map

The Professional Sealing Solution Supplier.

Mail to: sales@dmsseals.com

TEL:+86-757-86235767

Home  > Top PRODUCTS  > Quality Spring Seals  >  spring energized seals spring seal spring energized seals manufacture
spring energized seals spring seal spring energized seals manufacture
spring energized seals spring seal spring energized seals manufacture
Diameter Range
3~1600mm
Pressure Range
40MPa
Temperature Range
-40℃+260℃
Speed
15m/s
Medium
all liquids, chemicals and gases
Company Advantages
1. Moreover, we will cultivate our business little by little and perform each task step by step. Abiding by the management principle of 'Three-Good & One-Fairness (good quality, good credibility, good services, and reasonable price), we are looking forward to welcoming the new era with you.We have developed solutions of the sealing of special working condition
2. Our products mainly include rod seals, piston seals, scraper seals, rotary seals, rubber seal products and spring seals. DMS Seal Manufacturer believes the achievement of customer expectation will enhance the customer satisfication.
3. spring energized seals is an arising spring energized seals developed on the basis of spring loaded seal. DMS Seal manufacturer was established in 2008 and now has more than 10 years professional experience
4. spring seals is one of the most promising new developments of oil seal spring field , due to spring energized seals. As a modern sealing technology company, DMS Seal manufacturer has a wealth of experience
5. Dms Seals Technology Co.,limited offers oil seal manufacturer buyers a spring loaded seal-year parts warranty as well as lifetime technical support from our team of experts. The R&D teams have the ability to design and develop seals for various of complicated working condition of sealing system.

1. Application and properties

Suitable for reciprocating piston rod or piston single acting seal, the working pressure has a wide range of adaptability, and the pressure capacity can be enhanced by increasing the tail length size or increasing the check ring.

Small friction coefficient, The contact pressure between the mating surface and the mating surface is low, and the friction between the work face and the mating surface is the smallest in all seal types. with or without lubrication can work, wear resistance, long service life.

The working medium of the sealing sleeve has wide adaptability, and the other chemicals are not reacted except soluble alkali metal, high temperature fluorine gas and three fluoride chloride.

The working temperature range is wide, and can be used for -200 ℃ to +250 ℃.

It can be used for very high speed, very low speed, micro-stroke and other special conditions.

Suitable for aviation, military and industrial sealing groove size, The standard installation groove is the same size as the standard O ring, and the size is small. It can be designed as non standard parts to meet the sealing requirements of any size groove. The groove is open or semi open.

It can be used in rotary sealing. It can adapt to large eccentricity and beating.


2. Standard materials

Sealing sleeve: PTFE

Spring: Stainless steel 304, 316


3. Working Conditions

Working  Conditions

Diameter Range

Pressure Range

Temperature Range 

Speed

Medium

3 - 1600mm

0 - 20MPa

-200 ~ +250

5 m/s

High and low temperature oil and water and other fluids.


4. 
Installation Sizes

Back pressure surfaceR1=0.1 ~ 0.2, tank bottom R2=0.3 ~ 0.5, Import lengthC=(0.7 ~ 1.0)L.

Rod Diameter

 

Groove Width

Groove Diameter

Radial Clearance

 

d

L

D

e

2 ~ 10

2.5

d+3.0

0.05

10 ~ 22

3.2

d+4.0

0.065

22 ~ 52

4.7

d+6.0

0.075

48 ~ 150

7.5

d+10.0

0.09

150 ~ 400

11.0

d+15.0

0.10


5. 
Matters needing attention  

Ⅰ, The installation groove must be open or semi open, and it is recommended to be open.

Ⅱ, If the seal is for the rotating shaft, it is recommended that the surface hardness of the shaft should be no less than HRC40.

Considering the adaptability of the working medium, the adaptability of the jacket and spring should be taken into account.

Ⅳ, It is better to install an anti fouling ring or a antifouling guide ring in the notch direction in front of the seal.



Company Features
1. DMS Seal Manufacturer has been committed to high-level quality and service for spring energized seals since the day of its establishment.
2. Inquire! DMS Seal Manufacturer Is Looking For Creditable spring seals, spring energized seals, spring loaded seal Wholesale Agents All Over The World. Do Feel Free To Contact Us.
3. DMS Seal Manufacturer is committed to wining wide market with its core competitiveness. Get quote!
Product Message
社媒暂无评论
Contact